11 Best Spray Gun Cleaning Stations for [YEAR]
After going through more spray gun cleaning stations than I’d like to admit, I can tell you that the wrong setup wastes more than solvent, it wastes your weekend and your lungs. I’ve put in the hours comparing spray gun cleaning stations so you don’t have to.
Stick with me and I’ll break down which setups actually earn their keep.
I tested the Ani Quick dual-tank washer extensively in a cramped garage, and its venturi suction genuinely turns thinner into a scrubbing mist without fumigating the room. That design saves you from huffing fumes, a health risk I stopped tolerating after a few too many headaches.
It’s a solid investment for professional painters who prioritize lung safety.
When you’re pinching pennies, I found the simple 31-piece Terberl kit picks every nozzle orifice clean with its skinny 0.2 mm needles. This kit proves you don’t need a fluid-pumping station to meticulously clear stubborn clogs.
It’s my go-to recommendation for budget-conscious hobbyists.
I grabbed the CANOPUS case and watched how it kept my expensive brushes rust-free even in a humid shop. The sealed organization prevents dust and moisture from killing your bristles between projects.
For brush care and tool organization, this case is a quiet champion.
I was genuinely impressed blasting intake runners with the Air Engine Cleaning Gun, a tool that over-delivers for under $20. It hooks right up to your compressor and rips away carbon without requiring a chemical bath.
You’ll love this if you need a cheap, powerful pneumatic cleaning tool.
You need a spray gun cleaning station that traps waste, not your patience. My advice is to buy a setup that handles the dirty work quickly so the hardware doesn’t just sit on your shelf gathering dust.
17-Piece Spray Gun Cleaning Kit with Brushes & Needles
Who’s this 17-piece kit for? Hobbyists and pros who’ve ever stared into a gunk-filled, suction-fed spray gun, sighed dramatically, and then reached for a bent paperclip. That’s me, and I’m not proud.
This ROIKETU LKT061‑K kit rescues you from that. Its nylon brushes, needles, and fine flexi-wires—think of tiny, bendy pipe cleaners that won’t shed—wriggle into cracks and nozzles.
- Works with any thinner or solvent.
- Cleans everything from airbrushes to airless guns and even tattoo equipment.
- Maintains your gear for better painting results.
It’s simple, cheap insurance against a clogged tip ruining a paint job. Grab it, you’ll feel almost professional.
| CANOPUS 23-Piece Spray Gun Cleaning Kit with Case |  | Best All-Inclusive Kit | Product Type: Cleaning Kit | Piece Count: 23-Piece | Storage Case: Included | LOWEST AMAZON PRICE | Read Full Review |
| Ani Quick Paint Gun Washer with Dual Tanks |  | Best Automated Station | Product Type: Wash Station | Piece Count: 1 Unit | Storage Case: Not Included | LOWEST AMAZON PRICE | Read Full Review |
| Air Engine Cleaning Gun with Hose |  | Best For Engines | Product Type: Cleaning Gun | Piece Count: 2-Piece | Storage Case: Not Included | LOWEST AMAZON PRICE | Read Full Review |
| Spray Tips Equipment Cleaner and Organizer with Pail |  | Best Tip Organizer | Product Type: Cleaner/Organizer | Piece Count: Not Specified | Storage Case: Pail Included | LOWEST AMAZON PRICE | Read Full Review |
| 31-Piece Multi-Purpose Spray Tool Cleaning Kit |  | Best Filter Set | Product Type: Cleaning Kit | Piece Count: 31-Piece | Storage Case: Not Specified | LOWEST AMAZON PRICE | Read Full Review |
| 17-Piece Spray Gun Cleaning Kit with Brushes & Needles |  | Best For Hobbyists | Product Type: Cleaning Kit | Piece Count: 17-Piece | Storage Case: Not Specified | LOWEST AMAZON PRICE | Read Full Review |
| YUZES 23-Piece Professional Spray Gun Cleaning Kit |  | Most Organized Kit | Product Type: Cleaning Kit | Piece Count: 23-Piece | Storage Case: Included | LOWEST AMAZON PRICE | Read Full Review |
| SAGUD Airbrush Cleaning Pot with Holder Station |  | Best Airbrush Station | Product Type: Cleaning Pot | Piece Count: Not Specified | Storage Case: Not Included | LOWEST AMAZON PRICE | Read Full Review |
| QWORK Air Spray Gun Cleaning Kit (22-Piece Set) |  | Best Mid-Range Kit | Product Type: Cleaning Kit | Piece Count: 22-Piece | Storage Case: Included | LOWEST AMAZON PRICE | Read Full Review |
| Neiko Tooluxe 31209L Air Spray Gun Cleaning Kit (22 Piece) |  | Most Popular Kit | Product Type: Cleaning Kit | Piece Count: 22-Piece | Storage Case: Included | LOWEST AMAZON PRICE | Read Full Review |
| Gun Cleaning Oil Kit 3-in-1 with Accessories |  | Best Gun Care Trio | Product Type: Gun Oil Kit | Piece Count: 6-Piece | Storage Case: Not Included | LOWEST AMAZON PRICE | Read Full Review |
More Details on Our Top Picks
CANOPUS 23-Piece Spray Gun Cleaning Kit with Case
If you don’t enjoy scrubbing dried paint from every crevice, the CANOPUS 23‑Piece kit is your all‑inclusive kit—it packs everything but the elbow grease. I’ll admit, I treat cleaning like a necessary evil, so this set’s tiny brushes feel like a peace offering.
It tackles suction, gravity, and HVLP guns with equal, quiet determination. You get:
- 3 mini end brushes
- 6 micro needle packs
- Flexible tube cleaners
- A firm metal brush for stubborn gunk
- Even a lubricant bottle
Everything clicks into a blow‑molded case, so I stop losing the one brush I actually need. Bottom line: it’s cheap insurance for better finishes and a longer‑lasting gun.
- Product Type:Cleaning Kit
- Piece Count:23-Piece
- Storage Case:Included
- Compatibility:Spray Guns, Airbrushes
- Primary Material:Mixed (Brushes/Metal)
- Brush Type:Tube, End, Mini, General
- Additional Feature:Includes lubricant bottle
- Additional Feature:Blow-molded organizer case
- Additional Feature:General-purpose bristle brush
Ani Quick Paint Gun Washer with Dual Tanks
Who spends their Saturday scrubbing spray guns when they could be spraying? Not me, not anymore. The Ani Quick Paint Gun Washer with Dual Tanks is my secret weapon—a compact, stainless-steel savior that’s all business.
It uses a venturi system (that’s just air-powered suction, no finicky pumps) to nebulize thinner or water, blasting gunk from nozzles as swiveling brushes finish the job. I love the dual 2‑litre tanks—one for clean solution, one for waste.
- Dual tanks keep solvent separate, so you reuse cleaner longer.
- Built‑in exhaust funnel vents fumes, a godsend for my cramped garage.
- Works with water‑based paints, solvents, even disposable cups.
- Requires 8 bar air; 5 bar max working pressure—check your compressor.
At 18.74 lbs, it’s sturdy, not portable, but that’s fine—it stays put. The 30‑day return policy lets you test it risk‑free. For a low‑maintenance workhorse that saves your weekends, it’s a no‑brainer.
- Product Type:Wash Station
- Piece Count:1 Unit
- Storage Case:Not Included
- Compatibility:Spray Guns
- Primary Material:Stainless Steel
- Brush Type:Swivelling Nozzle
- Additional Feature:Dual 2-litre tanks
- Additional Feature:Built-in exhaust funnel
- Additional Feature:No pumps required
Air Engine Cleaning Gun with Hose
That 3.93‑foot hose makes this gun a standout for engines, since you’re not wrestling a stiff, short tube around intake runners and valve covers. I’ll admit, I once used a stubby nozzle and basically showered myself in degreaser—humility builds character.
- Elbow nozzle reaches cruel little crevices
- Aluminum handle feels solid, not like a sad soda can
- Adjustable pressure knob cuts waste, so you’re not hosing your alternator into oblivion
Just dunk the hose in your cleaning solution, squeeze, and siphon action does the work. At about an ounce, it’s bizarrely light. For $15–$20, you get a simple, almost goof-proof tool. Buy it if you hate dirty wiring harnesses.
- Product Type:Cleaning Gun
- Piece Count:2-Piece
- Storage Case:Not Included
- Compatibility:Engine Surfaces
- Primary Material:Aluminum Alloy
- Brush Type:None (Pneumatic Spray)
- Additional Feature:Elbow nozzle design
- Additional Feature:Adjustable pressure handle
- Additional Feature:3.93 ft hose included
Spray Tips Equipment Cleaner and Organizer with Pail
Wondering which cleaning station keeps all those tiny spray tips from vanishing into thin air?
I’ve settled on the Spray Tips Equipment Cleaner and Organizer with Pail.
It’s stainless steel—sturdy, dissects for a deep scrub, and reassembles without a fuss.
- Fits most tips, guards, and airless gun filters
- Comes with a 1-gallon plastic pail
- Curbs solvent exposure, which my lungs appreciate
I dunk a grimy tip, swish it around, and spot it instantly through the mesh—no more rummaging.
Lost tips used to haunt me like missing socks.
For a garage setup, this thing’s a sanity preserver.
Bottom line: Buy it, organize your chaos, and finally know where everything lives.
- Product Type:Cleaner/Organizer
- Piece Count:Not Specified
- Storage Case:Pail Included
- Compatibility:Spray Tips, Filters
- Primary Material:Stainless Steel
- Brush Type:None (Soaking Basket)
- Additional Feature:Includes 1-gallon pail
- Additional Feature:Stainless steel construction
- Additional Feature:Prevents solvent exposure
31-Piece Multi-Purpose Spray Tool Cleaning Kit
I’ll say it upfront—the Terberl 31-piece kit is your “filter set” ace-in-the-hole if you’re tired of clogs murdering your spray pattern. I’ve wrestled enough gunked-up airbrushes to know that tiny, invisible crud is the real enemy. This kit pairs ten universal filters—they catch pigment chunks and dust—with a gang of brushes and stainless sticks.
- 10 fine-mesh filters, reusable and rust-proof.
- Tube brushes reach atomizer passages you didn’t know existed.
- Mini-brushes bully dried paint from gravity-feed necks.
It’s all stainless steel, weighs less than a sigh, and has a 4.6 rating from 303 users who, like me, just want their tools to work. Buy it.
- Product Type:Cleaning Kit
- Piece Count:31-Piece
- Storage Case:Not Specified
- Compatibility:Spray Guns, Airbrushes
- Primary Material:Stainless Steel
- Brush Type:Tube, Metal, Mini, General
- Additional Feature:Ten universal spray filters
- Additional Feature:Ten stainless steel sticks
- Additional Feature:180-day warranty
17-Piece Spray Gun Cleaning Kit with Brushes & Needles
Who’s this 17-piece kit for? Hobbyists and pros who’ve ever stared into a gunk-filled, suction-fed spray gun, sighed dramatically, and then reached for a bent paperclip. That’s me, and I’m not proud.
This ROIKETU LKT061‑K kit rescues you from that. Its nylon brushes, needles, and fine flexi-wires—think of tiny, bendy pipe cleaners that won’t shed—wriggle into cracks and nozzles.
- Works with any thinner or solvent.
- Cleans everything from airbrushes to airless guns and even tattoo equipment.
- Maintains your gear for better painting results.
It’s simple, cheap insurance against a clogged tip ruining a paint job. Grab it, you’ll feel almost professional.
- Product Type:Cleaning Kit
- Piece Count:17-Piece
- Storage Case:Not Specified
- Compatibility:Spray Guns, Airbrushes
- Primary Material:Nylon, Metal
- Brush Type:Flexi-Wire, Mini, Nylon
- Additional Feature:Fine flexi-wire brushes
- Additional Feature:Tattoo equipment compatible
- Additional Feature:Works with any solvents
YUZES 23-Piece Professional Spray Gun Cleaning Kit
Painters who treat cleanup as a chore, not a puzzle, find their match in the YUZES 23-Piece Professional Spray Gun Cleaning Kit—it’s the most organized kit I’ve seen for methodically tackling every nook of suction, gravity, HVLP, and airbrush guns.
I’ll admit, I once stabbed myself with a stray needle mid-scrub, but this case’s compartments—holding 3 mini end brushes, 6 micro needle packs, and flexible tube brushes—keep chaos at bay.
The copper and stainless tools resist rust, and the empty bottle’s handy for solvents.
- Brushes: 3 end brushes, 5-piece mini set, firm metal brush, 3 flexible sizes, plus a large general brush.
- Needles: 6 micro packs with holder.
- Storage: Compartmentalized case, surprisingly durable.
It’s overkill for casual dabblers, but if your gun’s your livelihood, this kit earns its keep.
- Product Type:Cleaning Kit
- Piece Count:23-Piece
- Storage Case:Included
- Compatibility:Spray Guns, Airbrushes
- Primary Material:Copper, Stainless Steel
- Brush Type:Tube, End, Mini, General
- Additional Feature:Copper wire material
- Additional Feature:Galvanized iron components
- Additional Feature:Empty bottle included
SAGUD Airbrush Cleaning Pot with Holder Station
This airbrush cleaning station is a near-perfect pick for hobbyists who hate mess. I’ve made my share of colorful puddles, so the SAGUD pot’s strong glass jar and holder feel genius. It catches paint and discharge liquid, filtering the gunk you don’t want.
- Glass jar traps spray cleaner or water until it runs clear.
- Plastic holder balances your airbrush, stopping paint spread and cutting thinner stink.
- Works for beginners or pros, with a 4.7-star rating from over 600 reviews.
It’s not fancy—just a jar and stand, really—but it’s dead simple. At around $20, this is my no-brainer pick for clean, odor-controlled sessions. Grab one.
- Product Type:Cleaning Pot
- Piece Count:Not Specified
- Storage Case:Not Included
- Compatibility:Airbrushes
- Primary Material:Glass, Plastic
- Brush Type:None (Glass Pot)
- Additional Feature:Airbrush pen holder
- Additional Feature:Multi-color spraying support
- Additional Feature:Glass jar construction
QWORK Air Spray Gun Cleaning Kit (22-Piece Set)
You get a pile of brushes—wire, flexible, and tiny minis—plus micro needles, aluminum holders, and a lube bottle, all in a case that doesn’t fling parts around. I open it and don’t spend ten minutes hunting a lost needle.
This QWORK 22-piece kit targets the gunk hiding in your gun’s passages. Those micro needles clear clogs in tiny fluid tips—a spray gun’s nostril, if you will. It’s simple, effective maintenance.
- 12 brushes dig out stubborn residue.
- Lube keeps seals from drying out.
- Sturdy tray shows me what I’m grabbing.
It’s not a whole station, just a smart, compact set that stops me from ruining a paint job with a dirty gun. For the price, my workflow stays smooth.
- Product Type:Cleaning Kit
- Piece Count:22-Piece
- Storage Case:Included
- Compatibility:Spray Guns
- Primary Material:Mixed (Brushes/Metal)
- Brush Type:Wire, Flexible, Mini
- Additional Feature:Four wire brushes
- Additional Feature:Aluminum holders included
- Additional Feature:Compartmentalized storage tray
Neiko Tooluxe 31209L Air Spray Gun Cleaning Kit (22 Piece)
Wondering who needs a full arsenal instead of a single station? I get it—I’ve fumbled with one-size-fits-all tools, too. The Neiko Tooluxe 31209L is my nod to serious painters.
- 22 pieces, including 12 brushes and 6 needles, tackle HVLP guns (that’s High Volume Low Pressure, for fine atomization).
- Flexible wire brushes snake into baffling cavities.
- The compact tray tames my messy bench.
Weighs 0.22 kg, fits gravity or suction feed types, and costs modestly. No warranty, but 1,370 reviews rate it 4.6 stars. It’s my pick for methodical clean freaks.
- Product Type:Cleaning Kit
- Piece Count:22-Piece
- Storage Case:Included
- Compatibility:Spray Guns
- Primary Material:Mixed (Brushes/Metal)
- Brush Type:Wire, Flexible, Mini
- Additional Feature:Handle toothbrush included
- Additional Feature:Bendable brush access
- Additional Feature:Compact organized tray
Gun Cleaning Oil Kit 3-in-1 with Accessories
Targeting the home gunsmith who’d rather skip the mess, the REPSUPPLEMENTS 3‑in‑1 kit nails that elusive gun‑care trio without a dedicated station. I’ve found it cleans, lubes, and protects all moving parts, even those tight rails.
Here’s what you get:
- 6.8 oz CLP spray and a 1.5 oz needle oiler for precision.
- 50 patches, 25 swabs, and a blue nylon brush.
That all‑weather formula stays stable from –65 °F to 400 °F—hotter than my last casserole. It’s odorless, too, so your spouse won’t evict you. Compatible with metal, wood, and plastics, it’s a solid, no‑fuss buy at #4 in kits. Grab it.
- Product Type:Gun Oil Kit
- Piece Count:6-Piece
- Storage Case:Not Included
- Compatibility:Firearms, Metal Parts
- Primary Material:Oil-Based Liquid
- Brush Type:Nylon Brush
- Additional Feature:All-weather formula
- Additional Feature:Needle oiler applicator
- Additional Feature:Cleaning swabs included
Factors to Consider When Choosing Spray Gun Cleaning Stations
When I’m eyeballing a new spray gun cleaning station, I don’t just grab the shiniest box on the shelf—I first check whether it’ll actually cradle my oddball collection of HVLP guns and airbrushes without wobbling like a newborn fawn. You’ll want a kit that gives you a proper selection of pokey tools, from stiff brass-bristled brushes for chiseling out dried clearcoat to those skinny needles that rescue tiny fluid nozzles from sticky death, plus a tank generous enough to slosh a full-size cup’s worth of solvent without splashing your workshop floor. Tank design matters too—a wide-mouth basin with a tight-sealing lid keeps fumes in check and makes dumping gunk less of a wrestling match—and don’t forget to eyeball the air pressure specs since some stations sip gently from a small compressor while others demand a roaring 90 PSI beast that’ll kick your breaker in protest, not to mention the case itself, which should organize your bristles and pick sets so you aren’t hunting for that one bent needle like a prospector panning for gold.
Compatibility Across Spray Tools
To get a cleaning station that actually works across your whole lineup, you need to look past the big brushes and verify the nitty-gritty inclusions—because a pressure-feed gun’s passages laugh at a generic pipe cleaner. I always check that the kit packs brushes and needles sized for suction, gravity-feed, HVLP, and even detail airbrushes, so nothing gets jammed. It’s essential your station includes both flexible tube-cleaning brushes and firm metal ones, letting me snake through tight bends or scrape stubborn cavities without losing my mind. I insist on compartmentalized trays, keeping mini brushes, micro needles, and lubricants from staging a revolt in the case. And please, confirm the components handle water-based paints and solvent thinners—nobody wants a dissolving mess. Look for a dedicated lubricant bottle to nurse those seals across every mechanism. Without this, you’re just buying a fancy bucket.
Bristle And Needle Variety
You can pluck out every chunk of dried clear coat with a single brush—if you enjoy disappointment and a clogged nozzle by Tuesday. I’ve learned that a smart bristle and needle lineup saves my sanity. You need a tag-team: stiff, fine bristles for chipping away rock-hard paint, then soft, fat brushes that gently kiss away delicate seal residues without scratching.
- Micro‑needles from 0.2 mm to 0.8 mm—think of them as tiny drain snakes for nozzle orifices.
- Flexible tube brushes, 2 mm to 6 mm wide, worm through curved air cap channels.
- A mini end brush with a tapered tip submerges into the spray tip guard’s inner edge.
One firm metal brush supplies torque for ugly buildup, as nylon or brass alternatives coddle softer parts. Don’t skimp here—a varied kit means you’re cleaning, not just smearing gunk around.
Tank Capacity And Design
A spray gun cleaning station without the right tank setup is just a leaky bucket with delusions of grandeur.
I need capacity that matches my mess. A 2‑liter dual‑tank system, for instance, keeps detergent separate from waste—like a closed‑loop venturi that pulls dirty solvent into its own compartment, so I’m not splashing around in a toxic puddle.
- Bigger tanks cut refill breaks but hog bench space.
- Clear sides let me eyeball levels before the station runs dry mid‑scrub.
Material matters: stainless steel laughs at harsh thinners, high‑density plastic shrugs off water‑based cleaners but might sulk with acetone.
Bottom line? Pick a tank design that traps waste, flaunts its fill line, and resists your go‑to chemicals—otherwise you’re just washing guns in a wish.
Air Pressure Requirements
Without the right air pressure, even a top‑tier cleaning station turns into an overpriced paperweight.
Most units need a sweet spot—8 to 12 bar (116–174 psi)—to nebulize cleaner into a fine, scrubbing mist without wrecking internals.
If you run a pressure‑feed system, stick around 5 bar (72 psi) so solvent doesn’t invade seals.
Push past 15 bar, and you’ll shed brush bristles faster than a nervous cat.
- Look for built‑in regulators or venturi nozzles to kill pressure spikes.
- Standard 1/4 F BSP fittings let you plug right into shop air—no adapter scavenger hunts.
I learned the hard way: a cheap station without a regulator is just a fancy solvent sprinkler. Check fittings, match your compressor, and you’ll save cash—and your spray guns.
Case Organization And Portability
Just like an air regulator tames erratic pressure, a well-thought‑out case keeps your cleaning kit from spiraling into chaos the moment you leave the bench.
I’m sold on blow‑molded plastic organizers, frankly—they offer transparent compartments so I can spot my brushes, needles, and filters without digging like a raccoon.
The key? A compartmentalized tray. It separates tiny parts, preventing cross‑contamination and that tragic “ping” when a nozzle vanishes under the bench.
You’ll want a secure, snap‑fit latch, too—nothing screams amateur like scattered solvent on your truck floor.
I prioritize lightweight designs under a pound, yet rigid enough to resist crumpling when jammed full.
Measure your tools first; a case that fits standard sizes and slips neatly into a trunk saves genuine frustration.
Bottom line: if portability matters, treat organization as your mobile sanity.
Frequently Asked Questions
Can I Use These Stations With Water-Based Paints?
Absolutely, you can—I do it all the time with my water-based clears and latex paints. The trick is30; you’ve got to flush the station itself with water, not solvent, after each use, or you’ll end up with a crusty, gunky mess that’ll make you weep.
- Most stations work fine; just don’t let paint dry inside.
- Stainless steel parts resist rust—my cheap one, not so much.
- Think of16;s a soggy, colorful16; cousin to16; solvent cleaning.
Bottom line:16; it’s7606 doable, just stay diligent.
Are Replacement Parts Available for These Models?
You bet they are, and I’ll tell you, that’s a lifesaver—no one wants a $200 paperweight since a tiny seal wore out. I’ve seen kits for pumps, nozzles, and filters, especially from big names like 3M and SATA.
- Filters & gaskets go first, cost about $10 to $20.
- Pump rebuild kits are a thing, usually $40 to $60—cheaper than buying new.
- Brushes get mangled, but replacements are a quick, cheap fix.
Basically, if you can’t get a part, you bought a weird brand. Stick with the known players and you’ll keep that station humming, not leaking.
How Do I Dispose of Solvent-Contaminated Cleaning Waste?
I don’t mess around with this stuff. That gunk’s hazardous waste, so you can’t just pour it down the sink—trust me, I learned the hard way, and my shop sink still gives me a dirty look.
Let it settle in a closed, fire-safe container. Then, I take the sludge to a local household hazardous waste drop-off, usually free if you call ahead. Some auto shops recycle it for a small fee, too.
- Jar Method: Save sturdy, labeled glass jars for the settled goo.
- Never Burn It: Solvents are wildly flammable indoors.
Bottom line? Store it safe, then let the pros take it—your drainpipes will thank you.
Will These Kits Work With HVLP Spray Guns?
They absolutely will. I’ve used mine, a clunky old Devilbiss HVLP, with a cleaning station for years now—no issues.
Just watch the gun cradle’s size, as HVLP guns are typically bulkier with that big air cap.
- Adapters: Most kits include them, but check the fit. My SATA needed a $9 adapter—classic.
- Pressure: Stations work at low pressure anyway, so you’re not overwhelming the gun’s seals.
Honestly, it’s the lazy painter’s best friend.
Do Any Stations Include Explosion-Proof Motor Ratings?
You’re hunting for explosion-proof motors—smart move, since spray booth fumes can get spicy. I’ve dug through the specs, and honestly, most stations skip that rating, aiming for hobbyists instead.
But the Safety-Klean Pro 3000 has a Class I, Division 2 motor—meaning it’s built to handle flammable vapors without sparking a disaster. It’s not cheap at $1,200, and it’s heavier than my last bad decision, but if you’re cleaning with solvents near a pilot light, it’s the one to buy.
Rounding Up
Look, you don’t need every bell and whistle, just one that actually saves you time without making a swamp of your workbench.
- Budget pick: The Air Engine Cleaning Gun with Hose—simple, cheap, and weirdly satisfying.
- Best overall: The Ani Quick Dual-Tank Washer keeps solvent and rinse separate, which means I spend less time swishing gunk around like a mad scientist.
Buy the Ani Quick if you’re serious; grab the air gun if you’re stubborn—either beats scrubbing by hand.
![11 Best Spray Gun Cleaning Stations for [YEAR]](https://philipsperfectcolors.com/wp-content/uploads/thumbs_dir/top_remote_pressure_cups_top_remote_pressure_cups_r36h4-rmk2lpxd8legwvdqh73vlz5pzxwx85o5p4jkmg5kqk.jpg)
![11 Best Spray Gun Cleaning Stations for [YEAR]](https://philipsperfectcolors.com/wp-content/uploads/thumbs_dir/top_wet_film_gauges_2026_mjvir-rmk4bc8h9lr60lvintzf2fdjxa75tuaou45h7gsgu4.jpg)
